Milton-cat G300LG 300kW_375kVA Battery Charger Manuel d'utilisateur télécharger pdf

2 Amp and 10 Amp

Battery Chargers

Speciﬁcations

2 Amp 10 Amp

Nominal Input 120 VAC 120 VAC

Operating AC Line Voltage Range 108 to 132 Volts AC 108 to 132 Volts AC

Input AC Line Frequency 50/60 Hz 50/60 Hz

Battery Fuse 5 Amps 15 Amps

Nominal Charge Rate 2 Amps 10 Amps

Equalize Voltage 13.8 Volts

Float Voltage 13.8/27.6 13.0/26.0

Current @ Equalize to Float Transition 5 Amps

Battery Under-voltage shutdown 11/22 Volts 11/22 Volts

LED Indicators

AC Line Voltage Green LED On Green LED On

Battery Connected and Charging Yellow LED On Yellow LED On

1 > 0.5 Amp 1 > 2 Amp

Battery Current Drain 30 milliamp 30 milliamp

AC Line Connection Terminal Block Terminal Block

Battery Connection Internal to Control Panel Internal to Control Panel

Control Connection AC Power Fail Relay

Form C 2 Amp Rating

UL Listed Yes Yes

NFPA110 Compliant No Yes

The Olympian 2 & 10 Amp 12 and

24 Volt charger is designed to work

with the H control panel is mounted

within the H100 Enclosure. It

provides the ultimate in automatic

battery voltage maintenance.

The 2 amp is self regulating and

produces instantaneous output

current adjustments to keep the

battery charged to an optimum level.

Battery voltage is read on the H100

control panel readout The 10 amp

has automatic ﬂoat and equalizer

control. It precisely monitors the

battery’s voltage and automatically

activates the correct charging mode.

The charge rate is limited and

controlled to efﬁciently and safely

maintain ideal battery levels under

varying conditions.

The equalizer system uses a control

circuit to limit charging current to 10

amps. When battery voltage drops

beyond a pre-set level, charging

current increases to 5 amps and

then to the 10 amp charge rate if

needed. When the battery reaches

maximum charge the charger

switches to equalize mode. At

equalize, just enough current is

supplied to maintain the battery at

or above 13/26 volts. Battery voltage

and Charging current are read at the

digital display on the H100 panel.

Battery Charger shown from inside of Control Panel Enclosure.

Connections are made via an attached harness.

Information contained in this publication may be considered confidential.

Discretion is recommended when distributing.

Materials and specifications are subject to change without notice.

CAT, CATERPILLAR, OLYMPIAN, their respective logos and ''Caterpillar Yellow'', as well as corporate and product

identity used herein, are trademarks of Caterpillar and may not be used without permission.

www.CAT-ElectricPower.com

Printed in U.S.A.

2 Amp and 10 Amp 1
Battery Chargers 1

Résumé du contenu

Page 1 - Battery Chargers

2 Amp and 10 AmpBattery ChargersSpeciﬁcations 2 Amp 10 AmpNominal Input 120 VAC 120 VACOperating AC Line Voltage Range 108 to 132 Volts AC 108 t

Commentaires sur ces manuels

Pas de commentaire

Milton-cat G300LG 300kW_375kVA Battery Charger Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Générateurs Milton-cat G300LG 300kW_375kVA Battery Charger. Milton CAT G300LG 300kW_375kVA Battery Charger User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Générateurs Milton-cat G300LG 300kW_375kVA Battery Charger